Trident Rainwater Filter

Trident Rainwater Tank Filter

Do you want to collect rainwater on your (flat) roof? Then dirty rainwater is not something you want. In that case, it may help to filter the collected rainwater before it reaches the rainwater tank. The Trident Rainwater Filter can help you do just that!

How does this rainwater filter work?

The Trident tank filter is made to filter rainwater coming from roofs for you. With a polythene filter housing, and a stainless steel filter plate, this filter is specially made to ensure that dirt is left behind on the filter plate. This keeps your collected rainwater clean!

The filter is also equipped with two skimmer overflows. This means that when the tank is full, excess rainwater goes directly away to the overflow. In case of heavy rainfall, the excess rainwater will drain through the filter plate, which ensures that any dirt left on the filter plate will also be flushed away.

Tank filters can be built into a cistern or tank. This filter is specially made for rainwater coming off roofs, with a maximum roof area of 450m².

Features Trident Rainwater Tank Filter

• The housing of the filter is made of polyethylene (PE).
• Filter plate is made of stainless steel.
• This tank is also suitable for existing wells because the inlet and outlet can be at the same height.
• Should the pit be full, the dirty top layer is drained through “skimmer” holes.
• The filter is suitable for a roof area of up to 450m².
• Available in 3 types of connection diameter, namely 110mm, 125mm and 160mm

Please note! Please take a look at the dimensions of this filter and check if it is suitable for your rainwater tank before purchasing. To do so, please see the technical specifications of this product.