Dosing Pump with Water Meter with Pulse Generator
Dosing Pump with Water Meter with Pulsifier – Complete Set
Do you want to dose a product to a (water) pipe? This can be done very precisely with this set. The water meter controls the dosing pump. It can thus add the desired dosage and maintain it when the flow changes. Does the water flow stop? Then the dosing pump also stops. The pump can be set, for example, to percentage, ppm or ml/amount.
Installation is simple. The water meter is placed in the water line.
This kit involves a manually vented metering pump and a 1/2″ water meter. Of course, other options are available, often from stock.
Version: VMS MF with 1/2″ water meter with dry counting for cold water.
Also available in higher flows, up to 1,000 liters per hour.
Other option needed? Or questions? Contact us or request a quote!
Features dosing pump with pulse meter
- Wall mounting
- Design: VMS MF 10-04 (10 bar – 4 liters per hour) or similar.
- Includes suction filter, 1/2″ injection valve and 4*6mm hoses.
- PVDF pump head
- Water meter: Catfi 1/2″ 1 pulse/liter
Available flow and pressure
Emec VMS MF – available versions
| Pressure (Bar) | Flow (l/hour) |
|---|---|
| 20 | 01 |
| 15 | 02 |
| 10 | 04 |
| 07 | 06 |
| 05 | 01 |
| 01 | 16 |
Water meter with pulse generator – available versions
| Model | Fittings |
|---|---|
| CATFI 15 | 1/2″ |
| CATFI 20 | 3/4″ |
| CATFI 25 | 1″ |
| CATFI 30 | 1.1/4″ |
| CATFI 40 | 1.1/2″ |
| CATFI 50 | 2″ |
Dosing Pump with Water Meter with Pulser – Models
In the table below you can see which versions are available. Can’t find the pump you want? Please contact us.
| VMS MF dosing pump with water meter with pulse diverter | |||
|---|---|---|---|
| Description | Constant/proportional metering system with water meter with pulsator | ||
| Features |
|
||
| Functions |
|
||
| Input |
|
||
| Output |
|
