Greasy Entretien du Seperateur de Graisse Recharge

€ 295,95 (incl. btw) € 244,59 (excl. btw)

Tackles odors and blockages at the grease pit and piping. Refill pack with one container of 20 liters of Greasy bacteria. Enough for 3 months.

Quantity:

add to cart

Greasy Grease Trap Maintenance (Refill Pack) | Helps and Prevents Odor in Grease Traps

Stop odors and blockages at grease separators? You can with Greasy! This is the refill pack with 1 can of 20 liters. You will need a dosing pump with timer to properly dose this product. The starter kit includes the pump and a barrel.

\n\n

A Grease Separator is mandatory for the hospitality industry and other businesses when grease-contaminated wastewater is discharged into the sewer system. This prevents the municipal sewer from becoming clogged. Unfortunately, there are also disadvantages to using the so-called grease trap. Common complaints are stench from the grease trap and clogged pipes, as well as having to clean it often and the filth it brings.

\n\n

Tackle it with Greasy!

This cleaning can be better and most importantly easier! Greasy is a simple but very effective solution against odor nuisance and an overflowing grease pit that can save you inconvenience and money!

\n\nThe advantages of GREASY

Minimum Effort, Maximum Effect: Replace the liquid container only once a quarter, within 1 minute!
Automatic Deliveries Possible: Receive a new drum automatically every quarter with GREASY if you wish.
Fully Automated All-in-1 System: Takes up little space and is suitable for any kitchen.
Cost Savings: Reduce the number of empties of your grease trap and save on cleaning costs.
Optimal Operation of your Grease Separator: Greasy enhances the operation of your grease separator.
Odor-free and Clog-free: Remove unpleasant odors and prevent clogging.
Ideal for Hospitality and Restaurants: Suitable for any kitchen environment.
Safe to Use: Completely safe to use for your business. No Hazard Symbols.

\n\n

How it works.

You can connect the Greasy system directly to the drain line. This is very simple. The system uses a dosing pump to add bacteria every night. These bacteria break down grease not only in the main line but also in secondary lines. The results are long lasting, even after the grease trap!

\n\n

Proven Effectiveness
\nGREASY contains specially selected microorganisms that efficiently and biologically break down grease. With up to 74% more activity than comparable products, GREASY prevents odors and blockages. In addition, it reduces the frequency of emptying and cleaning your grease trap.

\n\n

The refill package includes a 20 lter drum of Greasy bacteria. Sufficient for 3 months.

\n\n

GREASY! Greasy Effective!

What is the Greasy refill package?

The Greasy refill package consists of a 20 liter can of Greasy bacteria, designed to be used with a dosing pump with timer. This package helps maintain grease traps by reducing odors and blockages.

\n\n

How often should I replace the Greasy refill pack?

Each can of Greasy is sufficient for approximately three months of use in an average restaurant. The frequency of replacement may vary depending on the size of your kitchen and the intensity of use.

\n\n

What do I need to use the Greasy system?

To use the Greasy refill pack effectively, you need a functioning dosing pump with a timer. This is usually supplied in the starter kit.

\n\n

How do I install a new can of Greasy?

Remove the empty can from the dosing pump.
Place the new can in the same location.
Connect the dosing pump to the new can using the hoses provided.
Make sure all connections are tight and leak-free.

\n\n

Can I use the Greasy refill pack in any type of kitchen?

Yes, the Greasy system is designed to be flexible and compatible with any kitchen environment, making it ideal for the hospitality industry and other businesses that deal with greasy wastewater.

\n\n

How do I program the dosing pump?

Set the dosing pump's timer to automatically add the correct amount of Greasy bacteria each night. Refer to the dosing pump manual for specific instructions on programming.

\n\n

What should I do if I have problems with the Greasy system?

First check that all connections are correct and that the dosing pump is functioning properly. Contact us for further technical support or questions.

Product Description: The Greasy refill package consists of a 20 liter can of Greasy bacteria, designed to be used in conjunction with a dosing pump with timer. This package is an essential part of your grease trap maintenance regime, designed to eliminate unpleasant odors and blockages.

\n\n

Refill package contents:

20 liter can of Greasy bacteria.

Preparation

Step 1: Check your existing equipment

Make sure you have a working dosing pump with timer, as supplied in the starter kit.
Check that the dosing pump is correctly connected and functioning properly.

Step 2: Prepare the can for use

Make sure the can of Greasy is in an accessible place close to the dosing pump.

\n\n

Installation of the Refill Kit

Step 1: Remove the empty can

If you already have an empty can in use, disconnect it from the dosing pump.
Follow local guidelines for proper disposal of the empty can.

\n\n

Step 2: Connect the new can

Place the new can of Greasy in place of the old one.
Connect the hose from the dosing pump to the new can.
Make sure all connections are tight and leak-free.

\n\n

Daily use and maintenance

Step 1: Set the dosing pump

Program the dosing pump's timer to automatically add an appropriate amount of Greasy bacteria to the grease trap each night.

\n\n

Step 2: Daily check

Check daily that the dosing pump is functioning properly.
Check periodically to see if the level in the can is decreasing as expected.

\n\n

For more information or assistance, contact us!

Manage Consent

Greasy Entretien du Seperateur de Graisse Recharge