Chlorine pump high flow
Description
Versions
Description
Chlorine pump for high flow
Chlorine dosing is possible with this reliable, motor-driven membrane dosing pump. This Emec dosing pump can, depending on the version, dose up to 1000 liters per hour at 5 bar.
The use of high quality materials makes this pump also suitable for higher chlorine concentrations. The membrane is full of PTFE and the PVDF pump head lasts a very long time.
There is also a model with external control available, the Prius D MF. It can be controlled with pulse, mA or Volt.
Model: Prius D 10-105 with 3-phase motor (10 bar, maximum 105 litres per hour).
Note: above a chlorine concentration of 32.5% it is recommended that PVDF hoses are used.
Need to pump more than 1000 litres per hour? We can do that too. In that case, please contact us! You can also contact us for other questions or to place an order.
Properties chlorine pump high flow
- Complete with electric motor
- Adjustable stroke length
- Manual venting
- Supplied with complete kit (2 m delivery and suction hose, 2 m venting hose (PE), injection nipple and suction filter)
- For pumps from 240 l/h, an installation kit is optional.
- 1-phase 230V also available.
Emec Prius D MF - proportionally controllable chlorine pump
- External control by means of 4-20 mA - 0-10V etc. Possibly in combination with water meter for ppm or percent solution
Available flow and pressure
Prius D 50 Hz PVDF FP 3-phase
| Pressure (Bar) | Flow (l/h) |
|---|---|
| 10 | 60 |
| 10 | 105 |
| 05 | 240 |
| 05 | 530 |
| 05 | 750 |
| 05 | 1000 |
Versions
In the table below you can see which versions are available. Can't find the pump you want? Please contact us.
| Prius D 50 Hz 3-phase high flow chlorine pump | |||
|---|---|---|---|
| Description | Constant dosing system for chlorine | ||
| Features |
|
|
|
| Features |
|
|
|
| Available motors Depending on type |
|
|
|
|
|
|
English 
Nederlands 
Deutsch 
Français 
Español