Injection valve
Injection valve for dosing pump
An injection valve is placed on the pressure line of a dosing pump and can be screwed into a connection. For example, in a drill saddle or T-piece.
This injection valve is standard equipped with a PVDF housing, Viton O-rings, ceramic check valves and C267 springs, but other materials are available.
Note: The standard injection valves have a standard back pressure of 0.3 bar. Other pressures available.
Injection valve characteristics for dosing pump
- 1/2″ or 3/4″ thread (larger sizes available)
- Throughput 4x6mm to 13x16mm
- Model: 1/2″ 4x6mm PVDF-FP
- "ball valve
In the table below you can see which versions are available. In the table you can select some of these products. Can't find the pump you want? Please contact us.
| 1/2″ injection valve (mm hose connection inside-out) | 3/4″ injection valve (mm hose connection inside-out) | ||
|---|---|---|---|
| Available Implementation | 4×6 mm (SS+FP+SS) (AISI316) 6×8 mm (SS+FP+SS) (AISI316) 4×6(PVDF+FP+CE+C276) 8×10(PVDF+FP+CE+C276) 8X12(PVDF+WAX+CE) 8X12(PP+EP+CE) 12×18(PVDF+FP+CE+C276) 12×18(PVDF+EP+CE+C276) 12X18(PVDF+WAX+CE) 12X18(PP+EP+CE) | 13×16mm(PVDF+FP+CE+C276) 13×16mm(PVDF+EP+CE+C276) 8×10(PVDF+FP+CE+C276) 8×10(PVDF+EP+CE+C276) 8X10 (PVDF+WAX+CE) 8X12(PP+EP+CE) 12X18(PP+EP+CE) 13X16(PVDF+WAX+CE) | |
