Emec Catfi
Water meter for use with cold water.
Dry dial, so less pollution problems
For controlling a dosage on ppm or percentage in combination with a dosing pump.
Supplied with 2.5 meter cable.
Price applies to the following model: CATFI 15.
From
€199,65 including. €165,00 exclusive of VAT
Water meter with pulse generator with dry dial
This water meter with pulse transducer is placed in the water pipe. Because one or more pulses are generated per litre, a switched dosing pump or regulator can be controlled. This can then dose a liquid on the basis of the volume flow. For example, a percentage solution or ppm.
The dry dial is much less likely to cause problems with contamination than a wet dial. Suitable for cold water up to 30 degrees C.
Also available for hot water, or internally and externally coated. See "versions" for more info.
Declared price applies to CATFI 15.
Properties water meter with pulse generator.
- Water temperature max 30 degrees Celsius.
- Maximum water pressure 16 BAR.
- Equipped with 2.5m cable.
- Various throughput sizes available, see "Versions"-tab.
| Model | CATFI 15 | CATFI 20 | CATFI 25 | CATFI 30 | CATFI 40 | CATFI 50 |
|---|---|---|---|---|---|---|
| Fittings | Fittings 1/2″ | Fittings 3/4″ | Fittings 1″ | Fittings 1.1/4″ | Fittings 1.1/2″ | Fittings 2″ |
